FAQ

• 2017-05-31Why Is It Necessary to Have Right Heating Profile during Glass Tem…

  Therefore, it is critical to set the right heating profile during glass tempering process.Temperature should be determined according to the heating properties of glass at different stages.

• 2017-04-24Why will the glass with poor edging damage glass tempering furnace?

  Glass with poor edging tends to blast during the process of heating or cooling due to excessive concentration or uneven distribution of stress caused by edge defects. This may lead to significant damage to the glass tempering furnace.

• 2017-03-24What should we do if the glass is stuck to the ceramic rollers?

  What should we do if the glass is stuck to the ceramic rollers of the glass tempeirng furnace? The proper way to handle the situation is as follows:

• 2017-02-27What type of glass tempering furnace is the best choice for tempering ult…

  Continuous Tempered Glass Machine of LandGlass will be your best choice for tempering ultra thin PV glass.

• 2017-02-24Will the change of ambient temperature cause quality fluctuation of temp…

  LandGlass’ Adaptive Compensating System is your best option to solve the tempered glass quality fluctuation problem caused by the ambient temperature change.​

• 2015-07-06Tempering Furnace Maintenance on Key Parts (2)

  1、Furnace Top Lifting and Transmission GearsTo ensure the smooth lifting of the furnace, the trapezoidal lead screw rods inside the pillars need be lubricated with N46 oil after every lift (or at least once a month). Apply lithium grease to the bev

• 2015-06-20Tempering Furnace Maintenance on Key Parts (1)

  Ceramic roller is one of the key parts in glass tempering furnaces. The quality of the roller and its installation directly affect the product outcome.1、Regular Roller CleaningWhen the optical effect of the glass is less than desirable or there is

• 2015-03-02Instructions for operating loading Table Foot Switch

  The loading table of LandGlass tempering furnace is equipped with a machinery foot switch, which serves as an adjusting micro-inching unit during placement of the glass in the furnace. The following instructions should be followed for handling the sw