Project & Case
Contact Us
- Address: Guangjian Building, No.12 – Wangcheng Road, Luoyang, China
- Zip Code:
- Email:
- Phone:
- Fax:
Technical Data
-
2019-03-18What is Semi-tempered Glass?
Semi-tempered glass, also known as heat strengthened glass, is a kind of glass between ordinary float glass and tempered glass.
-
2019-02-18What are the requirements when winding kevlar rope onto the glass tempe…
What are the requirements when winding Kevlar rope onto the glass tempering furnace roller ? Use 12mmX3.5mm Kevlar rope to wind glass tempering furnace rollers to make sure every two adjacent rollers are winded clockwise and counterclockwise respect
-
2019-01-11What should you pay attention to when tempering screen printed glass?
To protect the screen printedsurface, the screenprintedsurface should be placed facing up whenyou feedthe silk printedglass into theglasstempering furnace; Make sure the screenprintedglass is dry before tempering; The screen printedglass may bend, wh
-
2018-12-24Common mechanical problems associated with the glass tempering furnac…
1. No response after pressing down the glass tempering furnace lifting button: Check whether the power supply is on and if the drive motor is damaged.
-
2018-11-19The composition of chillers in glass tempering furnace and how it works
The composition of chillers in the glass tempering furnace : the chillers are composed of several chiller assemblies, each consisting of a number of small air boxes and an air distribution box, connected to be an integrated device through the chiller
-
2018-10-22What are the main structural components of LandGlass’ C-bent glass te…
The C-bent section of LandGlass’ C-bent glass tempering furnace employs a fully integrated welding rack. The main components comprise of a cooling system, a drive system, a servo controlled bending system and an air control system.
-
2018-09-19What defects usually occur during the early stage of glass heating in th…
At this point, the speed of the convectional blowers in the upper section of the glass tempering machine should be properly increased or the upper and lower furnace temperature should be adjusted accordingly, allowing the glass to be rapidly flattene
-
2018-08-08How do you dismantle the ceramic rollers in the glass tempering furnace…
Only when the glass tempering furnace has been completely cooled before you can change the ceramic rollers in the tempering furnace.